Square Edge Worktops | Sizes | Specification

All these Square Edge Worktops have a chipboard core which is laminated on the top and bottom face with the same decor. Then all four edges of the panel are finished with the matching polypropylene edging [ PP ] offering a fully sealed panel.

22mm thick square edged worktops edged with the matching PP edging.

22mm Square Edge Worktop Sizes:

4050 x 360 x 22mm:
This worktop size is ideal for bathroom furniture, shelves, open units and window sills.
4050 x 650 x 22mm:
Used for most worktop runs in your kitchen, slightly deeper than the 600mm norm, these worktops also work well for Howden’s Kitchens and Ikea Kitchens that require slightly deeper worktops. Edged on all 4 edges as standard, makes them ideal for narrow breakfast bar worktops also.
2020 x 900 x 22mm:
A half length of the wider 900mm wide breakfast bar worktop, is a cost effect solution if you require matching island worktop end panels. These panels are faced front and back and edged on all 4 edges. Create a pair of 900mm tall end panels from this worktop size.
4050 x 900 x 22mm:
This panel will provide you with a stunning sized island unit or once cut, a shorter breakfast bar together with a single worktop end panel.

Additional PP edging material available if required after cutting has taken place.

Matching Splashbacks and Upstands complete the offer.

40mm square edge worktops edged with the matching PP edging.

40mm Square Edge Worktop Sizes:

4050 x 650 x 40mm:
Used for most worktop runs in your kitchen, slightly deeper than the 600mm norm, these worktops also work well for Howden’s Kitchens and Ikea Kitchens that require slightly deeper worktops. Edged on all 4 edges as standard, makes them ideal for narrow breakfast bar worktops also. The extra depth is also ideal if walls run out and excessive scribing is required.
2020 x 900 x 40mm:
A half length of the wider 900mm wide breakfast bar worktop, is a cost effect solution if you require matching island worktop end panels. These panels are faced front and back and edged on all 4 edges. Create a pair of 900mm tall end panels from this worktop size.
4050 x 900 x 40mm:
This panel will provide you with a stunning sized island unit or once cut, a shorter breakfast bar together with a single worktop end panel.

Additional PP edging material available if required after cutting has taken place.

Matching Splashbacks and Upstands complete the offer.

CUSTOM SIZE | 22mm | 40mm | 60mm | 80mm | 100mm Square Edge Worktops

In addition to the above worktop sizes, we also specialise in CUSTOM MADE worktops in all 22 decors, including the Sparkle Effect High Gloss Laminates.
Available in 5 different thickness of worktop, from 22mm up to an impressive 100mm thick, these CUSTOM MADE worktops are available ANY SIZE you require, up to a maximum panel size of 4050 x 1200mm.
Special shapes and Curves can be created and all we require is a simple sketch to enable us to quote for your requirements.

Custom made Worktops with curves are available with minimum internal radius of 70mm and minimum external radius of 30mm.
Sparkle effect/Quartz effect/High Gloss worktops are more susceptible to scratches than other worktop finishes, so additional care is required when handling, installing, using and cleaning.

Like what you see?
Would you now like a FREE quotation? Please fill in the Quotation Request form and once we have quoted for your requirements, we also offer FREE SAMPLES!

If you are still undecided or would like further information or advice, please give us a ring and see if we can help! Our telephone number is 01270 335006, however please note we are unable to give any prices over the telephone sorry.
Quotations are sent out in a written format via email only.